Back to Entrance Page Fireplaces Fencing and Gates Automotive Post Supports Xpanda Products
Brochures
Email
Post Supports
Fencing Accessories
Distributors
 
Post Supports > Fin Grip Post Supports
 
Bolt Grip Spike
 
 
 
Bolt Grip Spike
 
 
 
Bolt Grip Spike
 

BIC GARDEN Galvanised Steel Post Supports allow the installation of fence posts in minutes. They hold the fence post above ground level, protecting the base of the wooden post against infestation and rot.
The tough steel spike, once driven fully into the ground, provides a secure and stable fixing for the fence post.

INSTALLATION
1. Check position of any underground services before
installation.
2. Using a BIC Garden Driving Tool and a sledgeham-
mer start to tap the support spike into the soil.
3. Use a spirit level to make frequent checks for hori-
zontal and vertical alignment during the installation.
4. It is also important to check that the post support
spike doesn’t twist out of alignment with the fence.
Use the driving tool handles to twist the spike back into alignment if this happens
5. Continue to drive the spike into the soil until the box rests just above ground level.

FIN GRIP
The steel fins bite into the wooden post as it is hammered in, holding the post fast. The base spike (see opposite) embeds into the base of the post preventing any lateral movement.
Fin Grip is suitable for installing all types of wooden fencing.

BIC GARDEN Galvanised Steel Post Supports
allow the installation of fence posts in minutes
without the need for digging or mixing concrete
Manufactured from heavy gauge galvanised
steel for strength and durability, they hold the
fence post above ground level, protecting the
base of the wooden post against infestation
and rot.

A UNIQUE INTEGRATED SPIKE FOR POST STABILITY
Our unique integrated spike system has been designed to address the problem of ‘post wobble’ - an inherent weakness with all steel post support systems.
As the timber fence post is driven into the support box it engages with and embeds itself onto the steel spike rising from the base, thereby preventing any lateral movement of the post within the box.

 
Available in the following sizes :
REF
TYPE
SIZE
FGS756G
Fin Grip Post Support
75 x 600mm
FGS757G
Fin Grip Post Support
75 x 750mm
FGS107G
Fin Grip Post Support
100 x 750mm
For further information about fencing railing or gates, including advice on selection or fixing, please telephone Burbage Iron Craft Ltd on 01543 438217.
All designs © Copyright Burbage Iron Craft Ltd 2012
 
Top
Email
meta