Back to Entrance Page Fireplaces Fencing and Gates Automotive Post Supports Xpanda Products
Brochures
Email
Post Supports
Fencing Accessories
Distributors
 
Post Supports > Bolt Grip Spike
 
Bolt Grip Spike
 
 
 
Bolt Grip Spike
 
 
 
Bolt Grip Spike
 

BIC GARDEN Galvanised Steel Post Supports allow the installation of fence posts in minutes. They hold the fence post above ground level, protecting the base of the wooden post against infestation and rot.
The tough steel spike, once driven fully into the ground, provides a secure and stable fixing for the fence post.

INSTALLATION
1. Check position of any underground services before
installation.
2. Using a BIC Garden Driving Tool and a sledgeham-
mer start to tap the support spike into the soil.
3. Use a spirit level to make frequent checks for hori-
zontal and vertical alignment during the installation.
4. It is also important to check that the post support
spike doesn’t twist out of alignment with the fence.
Use the driving tool handles to twist the spike back into alignment if this happens
5. Continue to drive the spike into the soil until the box rests just above ground level.

BOLT GRIP
The heavy-duty twin bolt fastening system holds the post as effectivly as the Fin Grip but with the added advantage of allowing easy installation or replacement of timber fence posts.
Bolt Grip is suitable for all types of wooden fencing as well as other types of garden structures such as decking, pergolas, car ports and gazebos.

BIC GARDEN Galvanised Steel Post Supports allow the installation of fence posts in minutes without the need for digging or mixing concrete Manufactured from heavy gauge galvanised steel for strength and durability, they hold the
fence post above ground level, protecting the base of the wooden post against infestation and rot.

A UNIQUE INTEGRATED SPIKE FOR POST STABILITY
Our unique integrated spike system has been designed to address the problem of ‘post wobble’ - an inherent weakness with all steel post support systems.
As the timber fence post is driven into the support box it engages with and embeds itself onto the steel spike rising from the base, thereby preventing any lateral movement of the post within the box.

 
Available in the following sizes :
REF
TYPE
SIZE
BGS756G
Bolt Grip Post Support
75 x 600mm
BGS757G
Bolt Grip Post Support
75 x 750mm
BGS107G
Bolt Grip Post Support
100 x 750mm
BGS726G
Bolt Grip Post Support
72 x 600mm
BGS927G
Bolt Grip Post Support
92 x 750mm
For further information about fencing railing or gates, including advice on selection or fixing, please telephone Burbage Iron Craft Ltd on 01543 438217.
All designs © Copyright Burbage Iron Craft Ltd 2012
 
Top
Email
meta